17
4.1 Basic Operation Procedures
4.1.1 Dangers
Some areas of the electric device have parts that are connected or have parts connected
to high voltage. These parts when touched may cause severe electrical shocks or even be
lethal.
Never touch manual commands such as switches, buttons, turning keys and knobs with
your hands wearing wet clothes and/or wet shoes. By not following these instructions
operator could be exposed to severe electrical shocks or even to a lethal situation.
4.1.2 Warnings
* The operator has to be well familiar with the position of ON/OFF Switch to make sure the
Switch is easy to be reached when necessary.
* Before any kind of maintenance, physically remove plug from the socket.
* Provide space for a comfortable operation thus avoiding accidents.
* Water or oil spilled on the floor will turn it slippery and dangerous. Make sure the floor
is clean and dry.
* Before using any commands (switch, buttons, lever), be sure it is the correct one. In case
of doubt, consult this manual.
* Never touch any manual commands (switch, buttons, lever) unadvisedly.
* If any work is to be made by two or more persons, coordination signs will have to be
IMPORTANT
If any recommendation is not applicable to your equipment , please ignore it .
IMPORTANT
Any change in the protection systems and safety devices will during operation,
create serious risks to the operator physical integrity
4. GENERAL SAFETY PRACTICES
The following safety instructions are addressed to both the operator of the machine as
well as the person in charge of maintenance.
The machine has to be delivered only in perfect conditions of use by the Distributor to the
user. The user shall operate the machine only after being well acquainted with the safety
procedures described in the present manual. READ THIS MANUAL WITH ATTENTION.
