8
2.2 Pre Operation
Before using the machine all parts that get
in contact with food must be washed with
running water and neutral soap. To clean
your Blender read item 3.4 Cleaning.
Make sure the blender is stable on its working
place.
2.2.1 Procedure to Disassemble and
Assemble the Cup
Before to use the blender the cup has to be
disassembled to wash all its parts.
Procedure to assemble the cup parts:
1 – Place the sealing ring n°01 on the central
bearing n°02,( Pic. 02).
2 – Fit the central bearing n°02 plus the
sealing ring n°01 in the cup’s base n°03,(Pic.
02).
3 – Thread the cup n°04 in the cup’s base
n°03.( Pic 02)
IMPORTANT
Make sure that the network voltage is the same as the machine voltage.
PICTURE 02
2.2.2 To Remove and to Place the Cup
The Cup # 03 (Pic.01) has a versatile fitting system allowing an easy, quick and safe placing.
To remove or to place the Cup # 03 (Pic.01) just lift it using the handle. Do always use the
handle with a firm hold to remove or to place the Cup.
06
05
04
01
02
03
