14. Install the new Skyjacker rear cross member using the 5/8" x
5 1/2" fine thread bolts, washers, & nuts. (See Photo # 13)
15.
Note:
It will be necessary to to grind the inside lower corners of
the OEM cross member for proper fitment of the new Skyjacker
front cross member. (See Arrows Photo # 14) Install the new
Skyjacker front cross member using the 5/8" x 4 1/2" fine thread
bolts, washers, & nuts. (See Photo # 15)
16. Install the new Skyjacker anti torque arm by installing the
bushing & sleeve in the eye of the assembly. Attach the eye at
the new Skyjacker front cross member using the 1/2" x 2 1/2”
fine thread bolt, washers, & nut. Attach the lower ear to the
differential using the 9/16" x 2 1/2” fine thread bolt, washers, &
nut. (See Arrow Photo # 15)
17. Install the new Skyjacker front differential skid plate to the front &
rear cross members using the four 5/16" x 1" bolts, washers, &
nuts. (See Photo # 16)
18. Attach the A-arms to the new Skyjacker cross members using
the OEM hardware.
19. Using a 15mm socket, remove the hub bearing assembly from
the OEM knuckle. Reinstall using the OEM bolts on the new
Skyjacker knuckles. (See Photo # 17)
20. Install the new Skyjacker strut spacer on the top of each OEM
strut using the OEM hardware & 18mm wrench. (See Photo
# 18)
I-C766SP
Pg 8
Photo #13
Photo #18
Photo #14
Photo #17
Photo #16
Photo #15
