Skyjack SJIII 6826E, Руководство по эксплуатации

Страница: 13 / 26

SJIII Series E - The CONVENTIONALS
118931AH
May 2002
SECTION 2, Page 14
1 2
1500W AC Inverter (Option)
Figure 2-4. 1500W AC Inverter
Inverter - The inverter is located on the base of the
machine, it has the following controls.
1. ON/OFF Switch - This slide switch will activate or
terminates inverter function.
2. Status LEDs - These LEDs indicate the operating or
fault status of the inverter .
3. 15 Amp Circuit Breaker - In the event of a power
overload or circuit grounding, this circuit breaker will pop
out.
4. GFCI Outlet - During inverter operation, this outlet
provides AC power.
Platform Controls
Operator’s Control Box
Figure 2-5 Operator’s Control Box
Operator’s Control Box
This metal control station is mounted at the right front of
the platform. It contains the following controls:
1- Lift/Drive Function Controller - A one-hand toggle-
type lever to control drive/lift motion and steer motion. It
is a “deadman” control which returns to neutral when
released.
2- Lift/Drive Enable Switch - This momentary “Trigger”
style switch (on later models) energizes the proportional
controller. It must be held depressed continuously while
engaging either the drive/lift or steer functions.
3- Warning Alarm Indictor Light - Light will glow and
an alarm will sound when an unsafe condition occurs.
4- Platform/Off/Base Select Key Switch (CE) - This
three-way selector switch allows the operator to turn off
the power to the unit or to activate either the base or
platform controls.
5- Emergency Stop Button - This red “mushroom-head”
shaped button switch is designed to disengage power
to the platform controls.
6- Lift/Off/Drive Select Toggle Switch - If “Lift” is
selected, the lift circuit is energized. “OFF” disconnects
power from both the lift and drive circuits. If “DRIVE” is
selected, the drive circuit is energized.
7- Operator Horn Push-Button - This momentary push-
button switch activates an automotive-type horn.
8- Lift/Drive Enable Push-Button (Earlier Models) -
This momentary push-button switch energizes the lever
controller. It must be held depressed while engaging
either the lift or drive functions.
Powered Extension Platform Control Box
Figure 2-6. Powered Extension Control Box
Powered Extension Platform Control Box
1- Enable Switch - This switch, when activated, brings
power to the Platform Extend/Retract Selector Switch.
2- Platform Extend/Retract Selector Switch - This
switch, when activated, extends or retracts the
platform.
2
1
4
3
1 2
7
8
3
4
5
7
6