Skyjack SJ7127 RT Скачать руководство пользователя страница 46

Страница: 46 / 94

Page 46

December 2007

Rough Terrain Scissors

Component Identification (Special Options)

Section 3 - Operation

3.6 Component Identification (Optional

Equipment/Attachments)

This following descriptions are for identification,
explanation and locating purposes only of optional
equipment.

3.6-1 Generator/Outrigger Control Console (If

Equipped)

The outrigger control console are located next to the
platform control console. These switches control the
outriggers’ extension and retraction.

Figure 3-6. Outrigger Controls with All Options on

Auxiliary Control Console

Generator Switch

- This switch activates the

generator.

Outrigger Extend/Retract Switches

- These

switches control the extension and retraction of
each individual outrigger.

Auto-Level Switch

- When this switch is in the

“

“ extend position, each outrigger will extend

and automatically adjust until the aerial platform
is level. When the switch is in the “

” retract

position, the outriggers will retract.

Outrigger Enable Switch

- This

“

”

outrigger

enable switch, when in the extend or retract
position, activates the functions on the auto-
level switch and the outrigger extend/retract
switches.

Leveling Indicator Light

- This light functions

when the auto and manual level functions are in
use and illuminates to display the status of the
auto-leveling outriggers. The indicator light has
the following states:

Off:

The outriggers are fully retracted.

Flashing Rapidly:

The outriggers are extending

or retracting.

Flashing:

Not all outrigger legs have firm

ground contact or aerial platform is not level.

On:

The outriggers are extended and the

platform is level.

3.6-2 Powered Extension Control Console (If

Equipped)

This control console is mounted on one of the
extension platform guardrails. It contains the following
controls:

Figure 3-7. Powered Extension Control Console

Enable Switch

- This switch, when activated and

held, allows the extension platform extend/retract
switch functions to operate.

Extend/Retract Switch

- This switch, when

activated, “

” extends or “

” retracts

the powered extension platform. Refer to

Section 3.8-9

on how to extend/retract the powered

extension platform.

Содержание SJ7127 RT































































































Результаты поиска

Содержание SJ7127 RT

Отзывы:

Похожие инструкции для SJ7127 RT

Бренды по названию

Популярные бренды

Skyjack SJ7127 RT, Руководство по эксплуатации

Результаты поиска

Содержание SJ7127 RT

Отзывы:

Похожие инструкции для SJ7127 RT

Бренды по названию

Популярные бренды