Skyjack 7127, Руководство по эксплуатации

Страница: 18 / 85

Mid Size & Full Size RT’s
Engine Powered February 2008
SKYJACK, Page 19
Component Identification Section 2 - Operation
2.5-8 Propane Cylinder (If Equipped)
The propane cylinder is located on the base of the aerial
platform. It has the following control:
11
Figure 2-9. Propane Cylinder
1. Cylinder Main Valve - Turn this valve clockwise to
shut off the fuel supply; counterclockwise to open
it.
2.5-9 Maintenance Support
The maintenance support is a safety mechanism
designed to support the scissor assembly. When
properly positioned it can support the scissor assembly
and empty platform. The maintenance support must
be used when inspection and/or maintenance is to be
performed within the lifting mechanism. To lower the
maintenance support, push lock lever rearward and the
maintenance support will drop. Refer to
Section 2.16 for
procedure on how to use and store the maintenance
support.
Figure 2-10. Maintenance Support
wARNiNG
The maintenance support must be used
when inspection and/or maintenance or
repairs are to be performed within the
lifting mechanism. Failure to use this
safety mechanism could result in death
or serious injury.
wARNiNG
Do not reach through the scissor assembly
when the platform is raised without the
maintenance support properly positioned.
Failure to avoid this hazard could result
in death or serious injury.
2.5-10 Manual Storage Box
This weather-resistant box is mounted inside of the
hydraulic/electrical compartment.
It contains operating manual,
ANSI manual of responsibility and
ANSI/CSA certificate. The operating
manual for this make and model of
aerial platform must remain with the
aerial platform and should be stored
in this box.