Skycut EV24 with SignMaster Pro, Руководство пользователя

Страница: 45 / 73

45

Use this option as an alternative to entering settings via the Cutter Control tab. It can be accessed from
the Properties button in the Send to be Cut window:

In the Vinyl Spooler window, click on the Cut Options tab and the cut settings are located in the lower
section of that window:
•
These settings should be understood thoroughly, as you will be adjusting them often as you change
materials or as your blade dulls over time. Note the prior screenshot shows the section number to go to for
more information.
3.3 Cut Settings
•
Before presenting the various settings, note that the Force and Speed settings can be set on the control
panel itself. In order to cut from SignMaster and use the settings on the Skycut, uncheck these boxes in
either of the two places where the settings can be made:

Send to be Cut > Cutter Control window:

Vinyl Spooler>Cut Options window:
Section 3.3.2
Section 3.3.4
Section 3.3.3
Section 3.3.1
Uncheck these boxes if Speed and
Force settings on Skycut are to be used
Click Properties to open
Vinyl Spooler window