64
Using
MY SKY
❖
Connections to
MY SKY
The connection diagram is shown on page 65.
WARNINGS
Always disconnect
MY SKY
from the power supply before you connect
it to (or disconnect it from) any other equipment
.
The only way to disconnect
MY SKY
from the power supply is to switch off
the power at the power point then remove the power lead.
MY SKY
must
therefore be installed near to the power point, which should be easily
accessible.
The supplied power lead has a 2-way connector at one end and a plug
at the other. You should always insert the 2-way connector into
MY SKY
before
you insert the plug into the power supply.
Do not connect the plug to the power supply until you have made
ALL the other connections.
MY SKY
operates with a 230V AC, 50Hz power supply.
Do not connect it to a DC power supply.
If you are in any doubt about the power lead, its plug or its connection,
consult a qualified electrician.
MY SKY
S
k
yN
ZP
V
R user.book Page 64 Thursda
y
,
N
o
v
ember 3,
2
005
2
:58 PM