2
Using
MY SKY
MY SKY
has been manufactured to meet international safety standards. To
obtain the best results and operate
MY SKY
safely it is important that you
read the safety instructions below. The
MY SKY
ratings label is positioned
on the underside of the appliance
If you have any doubts about the installation, operation or safety of MY SKY,
please consult SKY
.
WARNING!
Remember that contact with 230 V AC power can be lethal or
can cause a severe electric shock. To avoid this risk:
Never remove the top cover from
MY SKY
as there are
high-voltage live parts inside.There are no user-
serviceable parts inside
MY SKY
.
Make sure that all electrical connections are safe and
secure.
Do not connect any of your equipment (
MY SKY
,TV,
video recorder etc.) to the power supply until you have
properly connected all the other leads.
Disconnect
MY SKY
from the power supply (by switching
off the power at the power point and then disconnecting
the
MY SKY
power lead from the power point on the wall)
before you disconnect any other equipment from its rear
panel.
Never push anything into the holes, slots or other
openings of the
MY SKY
case (except your SKY Card, into
its correct slot).
CAUTION!
To ensure a free flow of air around
MY SKY
, allow at least 10cm of
space above and around
MY SKY
.
Never stand
MY SKY
on soft furnishings or carpets. Do not cover
any ventilation slots.
Do not place
MY SKY
in an unventilated cabinet or on top of a unit
which emits heat (e.g. a TV).
If
MY SKY
is placed with other items of audio/video equipment in a
cabinet, make sure
all
items have sufficient space all around them, to
allow ventilation and prevent overheating.
Do not stack items of audio/video equipment in a crowded space.
Do not use or store
MY SKY
in hot, cold, damp or dusty places.
Do not put anything on
MY SKY
which might melt, drip or spill into
it. Never stand objects filled with liquids, such as vases, on top of
MY SKY
.
Never place naked flame sources, such as lighted candles, on top of
MY SKY
.
Do not pick up or otherwise move
MY SKY
while it is connected to
the mains supply. If you want to move
MY SKY
, first disconnect it,
then wait at least 30 seconds before continuing.
If you move
MY SKY
between different locations at different
temperatures, allow it to reach room temperature before you
apply power to it.
For your safety
SkyNZPVR user.book Page 2 Thursday, November 3, 2005 2:58 PM
