5
TELESECOPE ASSEMBLY
ATTACHING THE
FINDERSCOPE (Fig.14)
1) Locate finderscope optical
assembly.
2) Slide finderscope assembly
into the rectancular slot and
tighten the thumbscrew to
hold the bracket in place.
Fig.11
INSERTING THE EYEPIECE
(Fig.12)
1) Loosen the thumbscrews on
the end of the focus tube.
2) Insert diagonal into focus tube
and re-tighten thumbscrews
to hold the diagonal in place.
3) Loosen the thumbscrews on
the diagonal.
4) Insert the desired eyepiece
into diagonal and secure by
re-tightening thumbscrews.
INSERTING THE EYEPIECE
(Fig.15)
1) Unscrew the thumbscrews
on the end of the focus
tube to remove the black
plastic end-cap.
2) Insert the desired eyepiece
and re-tighten thumb
screws to hold eyepieces
in place.
Fig.12
Fig.10
ATTACHING THE TELESCOPE
MAIN TUBE TO THE MOUNT
(Fig.10)
1) Place the telescope tube on the
mount, secure with the 2 thumb-
screws and washers from
underneath.
Fig.13
Fig.14
Fig.15
ATTACHING THE TELESCOPE
MAIN TUBE TO THE MOUNT
(Fig.13)
1) Place the telescope tube on the
mount, secure with the 2 thumb-
screws and washers from
underneath.
(for SK 80/350 EQ/TA, SK 80/400 EQ/TA and
SK MAK90 EQ/TA. SK 80/400 EQ/TA shown here)
TELESECOPE ASSEMBLY
(for SK 76/300 EQ/TA only)
ATTACHING THE RED DOT
FINDER (Fig.11)
SK 80/350 EQ/TA: Slide the red
dot finder into the grooves on the
bracket and tighten the Phillip's head
screws with a screw driver.
SK MAK90 EQ/TA: Slide the red dot
finder bracket into the rectangular
slot and tighten the screw to hold the
red dot finder in place.
