Page 3 of 4
3- Position the CK-1A7 box
under the base telephone with
the jacks facing towards the
back of the phone. (See Fig.
3).
4- Connect the short modular
cord from [1&2 to Phone] on
the CK-1 to the [LINE
1/L1+L2] jack on the bottom
of the Phone.
5- Connect a MOD cord from
Telephone Wall Jack 1&2 to
[1&2 to Line] on CK-1.
6- Connect one end of the
audio cord to the CK-1A7
AUDIO IN jack. Connect the
other end to the output of your
audio player. Do NOT use the
supplied Audio Adapter on the
CK1A7 side.
7- Connect the POWER
CUBE from the CK-1 box to
115VAC power.
Testing the
System:
1- Pickup line 1 on your
telephone. The line one Green
LED on the SENSOR BOARD should light up. Repeat this test for line 2.
2. If both lines light up when picked up, the CK-1 is working properly. If the lights on
the SENSOR BOARD do not light up, then
a) Make sure that the CK-1 and Phone is connected to power.
b) Make sure that the SENSOR BOARD is aligned properly. (Fig 2)
I hear Music when I pick up the phone
It is normal to hear a burst of music when a call is picked up from a HOLD condition.
The maximum length of the burst should be under 1 second. This is normal.
LINE 1/L1+L2
1 & 2 To Phone
Audio Cord from Player
Line 1 & 2 to Wall
FIG #3
