SKS-Kinkel Elektronik GmbH
300113 TK Adapter V2
EN
Support Hotline: +49 (0) 2661 98088-112
Support E-Mail: [email protected]
Version No. 1.0
Document No. 97013700
40
Note
The descriptive texts entered for each attendee are not conveyed when reading
out the TK Adapter V2, as those are only saved in the software and not by the TK
Adapter V2 itself. Thus your PC configuration will be overwritten when reading
out the TK Adapter and the descriptive texts will be lost. For this reason it is sen-
sible to make your changes only via the PC interface and not by DTMF.
8.2.8.8 History window
The history window reports all kinds of messages and information, for example the status of the data conveyed
or of the TK Adapter itself, missing COM-ports etc. If the program is closed the history will not be saved, when
opening the program again, the history is empty.
8.2.9
Volume settings
The volume is set on the
tab
“Volume settings”
.
Changing the volume is
possible without logging
in!
The default settings
(50% for Volume DAC exit and Volume DTMF-tones and 75% for Volume telephone to SKS
BUS and Volume SKS BUS to telephone) should be appropriate for most applications. The controllers should be
adapted only if needed, i. e. in case of malfunctions. We recommend to read out the volume settings first and then
possibly change them. After changing the new settings need to be conveyed by clicking on the button “Write”.
3
Volume DAC exit
(DAC = digital to analogue converter)
Here the volume of signal tones and voice output are set – this function is not in use at present.
3
Volume telephone to SKS BUS
This controller determines the telephone’s volume towards the SKS BUS (the door station)
3
Volume DTMF-tones
Here the volume level of the tone dialling can be controlled.
3
Volume SKS BUS to telephone
This controller determines the SKS BUS (= the door station’s) volume towards the telephone.
