manualshive.com logo in svg

Skov DOL 634 CE, Техническое руководство пользователя

Поделиться
Скачать
Skov DOL 634 CE Скачать руководство пользователя страница 53

DOL 634 CE

Technical User Guide

53

Menu

Function

Setpoint

Minimum ventilation

Maximum ventilation

Production

Number of dead animals

Silo 1, 2, 3, 4, 5

If there are animals in the house, climate and production functions which need to be run manually
during the update must be activated now.

13.4.2 Carrying out the software update

1. Loosen the screws (

A

) that hold the front panel in place.

2. Lift out the front panel.

Make sure not to pull the flat cable so that the plug (

B

) is damaged.

3. Insert the USB stick containing the software update in the USB port (

C

) on the CPU module.

In the menu 

 

 

Technical | Service | Install software

Select the required software version.

The installation process begins.

Settings are automatically saved before the update starts and
are loaded after the restart.

During the software update, the house controller will restart.

Содержание DOL 634 CE





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды