6
Installation
Service Manual
SKOPE OD1100N
2 Installation
The fridge is designed to operate within a climate class 3 environment (25°C @ 60% relative
humidity), and should not be placed in a location that is likely to exceed these conditions.
Cabinet
Location
Do not expose the cabinet to direct sunlight at any time, as this may cause plastic parts to
distort.
Do not place the cabinet in the direct airpath of air-conditioning outlets, ventilation fans or any
other fan which causes air movement directly into the cabinet opening. This will cause failure
of the air curtain and compromise the airflow and product temperature in the open cabinet
zone. Maximum air movement across the cabinet opening must not exceed 0.2 m/s.
Ventilation
To prevent overheating and conserve energy, ensure there is always at least a 50 mm gap at
the back, 200 mm on the top and 60 mm at the sides of the cabinet. Keep the ventilation slots
in the lower front panel clear at all times. Never store cardboard cartons or other objects in front
of the fridge.
To maximise airflow at the rear of the cabinet, ensure both rear stand-offs are fully extended
outwards and locked into place. This will provide the necessary air gap at the rear of the
cabinet for correct operation.
Power Cord
The fridge has a flexible power cord fitted with a 3
-
pin plug, at the rear of the cabinet. Take care
not to trap the cord or plug when positioning the cabinet.
Transportation
The cabinet is not designed to be stable while in motion. Use extreme caution when moving
or transporting the cabinet if it has been removed from its original crate.
Never strap across the glass sides of the cabinet as this may cause damage.
Ensure appropriate padding or protection is used to prevent damage when strapping.
Shelves
Adjusting the
Shelves
The fridge is fitted with five metal shelves. The four top shelves are height and angle
adjustable, and removable. The angled bottom shelf is angle adjustable. The top two shelves
are 1170W × 360D, the middle two shelves are 1170W × 380D, and the bottom shelf is
1179W × 400D.
IMPORTANT
The cabinet’s recommended operating temperature is between
18°C and 24°C and 60% relative humidity.
IMPORTANT
Do
not
leave the
cabinet
exposed to direct sunlight as this may
cause distortion of plastic parts.
IMPORTANT
There must be
no
air movement directly into the cabinet opening.
CAUTION
To prevent over-heating and conserve energy, ensure that air can
flow freely all around the cabinet, including underneath and on
top.
