11
SKOPE OD1100N
Electronic Controller
Service Manual
Service Mode
The service mode can be run using the controller faceplate, but SKOPE strongly recommends
using the SCS Connect Field app. You will need a 9-digit PIN to enter the service mode via the
controller. If you don’t have one, contact Customer Services to request a PIN.
Service mode includes:
Parameters
Allows you to access and edit individual controller parameters.
Reset
Returns the controller back to factory or default settings.
Manual test
Allows you to see the input values from the sensors, check the effects of output adjustments
to peripherals, and run preset test routines.
Statistics
Displays logged values and event counts for diagnostics and fine tuning.
About
Lists the properties of the refrigeration system and the controller, including fridge model codes,
and firmware, hardware and software versions.
Refer to Wellington Drive Technologies documentation for further information.
SCS Connect Field App
Connecting
The SCS Connect Field app gives authorised service technicians wireless access to the
controller from mobile devices with Bluetooth capability. The app provides data logging, alarm
notification, and control over inputs (probes, switches) and outputs (e.g. relays).
Procedure 3: To install the SCS Connect Field app
Before you start
When you first run the app, you will need to enter an activation code – a 9
-
digit PIN. If you don’t
already have one, contact Customer Services to request an activation code. You will need to be
connected to the internet at the time of activation.
Your activation code is unique to you, and determines your personal level of access for the app.
Never
share it with anyone else. The same code will give you access to all SCS apps you are authorised to
use.
1. Download and install the Connect Field app
https://apps.apple.com/nz/app/scs-connect-field/id1172570106
•
https://play.google.com/store/apps/details?id=air.com.wdtl.scs.diagnostic.mobile
