8
SKOPE Remote Glass Chiller – GC110r
Electronic Controller
SKOPE GC110r
Electronic Controller
Controller Overview
Function
The electronic controller controls and displays the internal cabinet temperature. The
preset temperature setting controls the product temperature between 1°C and 5°C. The
controller also signals temperature alarms (see “Alarms” on page 10).
Operation
For general operation, the electronic controller requires no initial setup or additional
programming. To ensure efficient operation, the electronic controller forces 6 hourly
defrosts. During the defrost cycle, the compressor and condenser fan switch off and the
evaporator fan stays on.
Controller Display
Faceplate
Because the electronic controller plays such an important role, it’s helpful to know the
parts of the faceplate you may use.
ES
1
2
3
4
5
6
8
7
No.
Item
Description
1
Digital display of cabinet temperature or messages.
The temperature is what the sensor inside the chiller detects, and not
necessarily the product temperature. However, they may be very close
depending on how the controller is set to sense temperature.
2
Up:
Button. Used for programming.
3
Set (mute):
Press to mute the alarm. Press and hold to access
parameters. Also used for programming.
4
Light (down):
Press to switch the cabinet light on and off. Also used for
programming.
5
Defrost:
ON when the defrost is activated. Flashes when activating the
defrost is temporarily delayed due to other procedures in progress.
6
Compressor:
ON when the compressor and condenser fan starts.
Flashes when activating the compressor is temporarily delayed.
7
Fan:
ON when the internal cabinet fans are activated. Flashes when
activating the fans is temporarily delayed.
8
Alarm:
ON when an alarm is signalled.
ES
