Skoda Octavia III 2013, Руководство по обслуживанию

Страница: 142 / 172

6.12 Changing the code of the service inter‐
vals
These tasks are carried out using the vehicle diagnosis, measur‐
ing and information system -VAS- together with the correspond‐
ing diagnostic cable ⇒ Vehicle diagnostic tester.
– On the diagnostic device, select: “Test plan” → “Bodyshell” →
“Electrical system” → “01 Self-diagnosable systems” → “Dash
panel insert - J285” → “Functions of the dash panel insert” →
“17- Service events” and next “Change fixed/variable inter‐
vals”.
– Continue to follow the instructions on the diagnostic unit.
WARNING
Note the following conditions when coding the service inter‐
vals:
Vehicles with QI6 by default can be recoded to QI1 - QI4 under
the following conditions:
• Carry out when changing the oil during “Öl change service” or
“Inspection”.
• Carry out the recoding using the diagnosis device.
A recoding to QI6 is possible subject to the conditions:
• Carry out when changing the oil during “Öl change service” or
“Inspection”.
• Carry out the recoding using the diagnosis device.
• Use prescribed engine oil.
• Vehicle meets prescribed specifications (original battery...)
WARNING
Vehicles with QI1 - QI4 factory preset cannot be recoded to
QI6.
6.13 Inspecting headlight beam setting and
adjusting if necessary
Special tools and workshop equipment required
♦ Headlight beam setting device
In principle the following inspection and setting description ap‐
plies for all countries. However, comply with national guidelines
and legislation of the relevant country ⇒ Operating instructions
for the headlight beam setting device .
Test and setting conditions
• Tyre pressure o.k.
• Lenses must neither be damaged nor soiled.
• Reflectors and bulbs o.k.
• Vehicle load must be achieved.
Load: with one person or 75 kg on the driver's seat in an otherwise
unladen vehicle (unladen weight).
Octavia III 2013 ➤ , Octavia III 2014 ➤
Maintenance - Edition 12.2014
138
6. Electrical System
ProCarManuals.com