Skoda Octavia III 2013, Руководство по обслуживанию

Страница: 134 / 172

6.8 Setting clock
Set the clock in the display of the dash panel insert
The clock is set using the operating buttons -1- and -3-.
– Switch ignition on and off.
– Press the button -3-
SET
.
The lettering -time- lights up in the display -2- of the dash panel
insert.
An hour display is shown in the display -2- at the same time as
the lettering -time-.
– Set the hours accordingly using the button
0.0
-1-.
After setting the hour, wait until the minute display is shown.
– Set the minutes accordingly using the button
0.0
-1-.
After performing the setting, wait a short period of time until the
display switches back to the normal display.
Set clock for vehicles with infotainment radio/navigation
Set the clock and the date according to the vehicle specification.
The vehicles are equipped with different infotainment radio/navi‐
gation. For operation refer to the ⇒ operating instructions info‐
tainment radio/navigation .
– Switch on ignition.
– Select the following in the infotainment radio/navigation:
“Device settings” (button
MENU
) and in addition button
SETUP
or
“Vehicle settings”.
– Further select the button
time and date
.
– Then proceed by referring to the read-out on the display.
Here you can also set the date, daylight saving time, time zone,
time and date format.
6.9 Connect diagnostic unit and query event
memory
Connect the diagnosis device and subsequent interrogating of the
event memory or other necessary functions are carried out with
the vehicle diagnosis-, measurement- and information system -
VAS- with appropriate diagnosis line ⇒ Vehicle diagnostic tester.
Connect the diagnostic unit to the diagnostic connector -1-.
Octavia III 2013 ➤ , Octavia III 2014 ➤
Maintenance - Edition 12.2014
130
6. Electrical System
ProCarManuals.com