Setup
INSTRUCTIONS
:
Pure O2 Portable Machine
Back View
Cord Placement
• Power Input is in the back of
the machine
• Insert adapter in the back at
the base of the machine
• Cord - DC power adapter
has a 2 prong plug.
Placement
Guidelines
•
(866) 312.7546
On/Off Switch
Two Buttons
• LED light on/off switch only
powers the LED light hand
pieces
• O2 on/off switch only
powers airbrush for
dispersing oxygen
LED light
Hand Pieces
• The white cord from the LED
light hand pieces have a
5 pin “Din Plug.” View the
LED socket to guide you for
perfect alignment before
inserting the plug into the LED
socket
Airbrush
Attachment
• Thread silver hose adapter to
the base of the oxygen gun
• Insert the black hose firmly
into the front of the machine
into the black fitting.
• When removing black hose
use index finger and thumb
to press down on the ring of
black fitting and pull hose to
remove
Thread silver
adapter to base
of oxygen gun
End of black hose. Insert
into the front tube fitting
for O2 Gun
F622019 Rev.2
