Skil-Care ChairPro 909370 Скачать руководство пользователя страница 1

Страница: 1 / 2

Mounting Bracket

LED

Fig. 1

Fig. 2

Skil-Care’s new ChairPro Seat Belt Alarm combines a wheelchair belt with

an alarm for double wheelchair safety. The belt attaches to the chair and

provides security while the user is seated. When the buckle is opened, an

alarm is activated. To assist long-term acre facilities maintain a restraint-free

environment, Skil-Care has selected a durable buckle that is easily released

by most wheelchair users.

PURPOSE

The ChairPro Seat Belt Alarm is designed to alert caregivers when a patient/

resident has released the wheelchair safety belt buckle and may leave from

the wheelchair.

CAUTIONS

1. The ChairPro Seat Belt Alarm is not a substitute for proper supervision.

Fall-risk and wander-risk patients or residents should be monitored regularly.

2. Check battery each time alarm is used. If weak, replace the 9-volt battery.

3. LED should glow when buckle is closed. If LED fails to glow, check battery.

Replace if necessary.

INSTALLATION

Alarm

Unit

You may choose one of the following

two ways to attach the alarm unit to the wheelchair.

Attachment of Alarm Unit

Mounting Bracket

1. Remove the second-from-top screw from either the left or

right side of the wheelchair backrest.

2. Remove grommet from screw, place the screw through

hole on alarm unit mounting bracket, and fasten screw to

wheelchair backrest. (Illustration A)

Cord Loop

1. Insert enclosed cord

loop through bracket hole.

(Illustration B)

2. Hang from wheelchair

push-handle (Illustration C)

SEAT BELT INSTALLATION

WHEELCHAIR BELT INSTALLATION (Grommet)

1. Remove the rearmost screws

from the left and right sides of the

wheelchair seat. (Illustration D)

2. Remove the grommets from

the screws, place screws

through the grommets at

the ends of both belt

sections, and refasten the

screws to the wheelchair seat.

(Illustration E)

3. Select either hole in

belt depending upon desired

length, closer holes will yield

a shorter length,

holes closet to the end

will yield a longer length.

4. Attach the two “spade”

connectors on the connector

wire to those on the seat belt.

(Illustration F)

Note, that for removable arm

wheelchairs it may be easier

to install the belt after the arm

is removed.

5. Place connector cord through the space between

the wheelchair seat and backrest. Make certain that

it is away from wheels and other moving parts.

WHEELCHAIR BELT INSTALLATION (Loop)

1. UnThread the loop end of the belt.

2. Remove the arm of the wheelchair

(if removable arms)

3. Lay belt on

wheelchair while

holding loop end,

place loop end around

the bottom of the

wheelchair (Fig. 1).

4. Place loop and

webbing under

both rectangular

rings (Fig. 2)

See Reverse

Side for Loop

installation 5-6.

Re-Order # Description

Belt Length

Unit

909370