Ski-Doo 850 Silber Troubleshooting Guide
If you feel your kit is not running correctly, this guide will help pinpoint the cause of the issue.
Problem: Sled not hitting RPM
Solution: Generally when the sled is not hitting RPM it is due to improper clutching, malfunctioning
clutches, dirty clutches or a boost leak on the charged side of the turbo system.
Verify clutches are working 100% properly and are clean.
Consider a new belt if it looks worn or glazed
Carefully examine the airbox and charge tube. Be sure there is absolutely no boost leak or
deformation of the airbox.
Consider utilizing epoxy to glue the silicone between the throttle body and to the airbox.
Add an additional hose clamp from charge tube to air box. Be sure to not crush the plastic.
Problem: Sled seems to have a low end bog
Solution: This is generally due to dirty clutches, a worn belt, or improper clutching. Our turbo system
and fueling map requires load on the motor to work properly. If the belt is slipping at engagement, the
sled will over fuel and feel rich.
Clean those clutches! Though its easy to do this on the sled, removal for inspection and a thorough
cleaning is best. We suggest brake cleaner or rubbing alcohol, a 3M pad, paper towel and elbow
grease.
Verify the clutch ramps are functioning properly, and the spring in the primary is not broken
Verify the exhaust system is not leaking. A leaking exhaust will cause the turbo to spool poorly and
will load the system properly.
Verify TPS is set properly. You will need BUDS to do this.
Final step – verify reeds are in good condition. Reeds can cause an off idle stumble if cracked,
chipped or warped.
Problem: Sled is detonating
Ensure you are utilizing enough octane for a specific boost level. To verify if its octane related, add
octane and go ride. If you do not det you know what the problem is. If you’d like to use a lesser
octane going forward, lower boost.
Ensure wastegate cap is installed properly. Be sure both closed ports are lined up right on top of one
and other. Make sure cap is tight and vacuum line has no leaks.
If below 3,000 feet, consider adding a boost gauge to verify boost
Be sure you are not revving over 8100. If so, add weight.
Consider gearing the sled up if you are maxing out weight on your clutches
Problem: Sled sputtering at mid to high RPM
