Ski-Doo 2006 RT series Скачать руководство пользователя страница 118 | Manualshive

Страница: 118 / 187

Ski-Doo 2006 RT series Скачать руководство пользователя страница 118

SPECIAL OPERATIONS

Riding at High Altitudes

If you ride at altitudes above 600 m (2000 ft), your snowmobile
should be modified. Refer to an authorized SKI-DOO dealer. Sum-
mit models are factory calibrated for high altitude. These models
must be converted for sea level utilization.

CAUTION: Do not change original factory calibration if snowmo-
bile is used below 600 m (2000 ft) (except Summit models).

Emergency Starting

The engine can be started with the emergency starter rope supplied
with the tool kit.

Remove belt guard.



WARNING

Do not wind starting rope around your hand. Hold rope by the
handle only. Do not start the snowmobile by the drive pulley
unless it is a true emergency situation. Have the snowmobile
repaired as soon as possible.

A07D0UA

Attach one end of emergency rope to a rewind handle.

NOTE:

The spark plug socket can be used as an emergency handle.

116

_________________________

«
...
116
117
118
119
120
...
»

Содержание 2006 RT series




























































































































































































Отзывы:

Нет отзывов