1
- 15 -
951-170-218-EN
Version 06
EN
1. Safety instructions
○
Avoid mixing up/incorrectly assembling
disassembled parts. Label parts.
1.16 Initial commissioning, daily startup
Ensure that:
○
All safety mechanisms are fully present
and functional.
○
All connections are properly connected.
○
All parts are correctly installed.
○
All warning labels on the product are fully
present, visible, and undamaged.
Illegible or missing warning labels are
immediately replaced.
1.17 Cleaning
○
There is a fire hazard from the use of
flammable cleaning agents. Use only
non-flammable cleaning agents that are
suitable for the intended purpose.
○
Do not use corrosive cleaning agents.
○
Do not use stream-jet equipment or
high-pressure cleaners. This may dam-
age electrical components.
Observe the IP protection class
○
Cleaning work must not be performed on
live conducting components.
○
Mark wet areas accordingly.
