SKF PowerLuber 1882E, Инструкция по эксплуатации и обслуживанию, Страница: 13 / 24

1880 Grease gun
16
23
20
19
22
17
25
24
2
21
Inspection
Visually inspect for damaged, loose or
missing parts If equipment is worn or
damaged, remove from service Contact an
authorized service center for damage
assessment or repair
Operation
Speed selection
Pressing button 2 switches the tool between
high and low pump speed The letter “L” or
“H” will be displayed on the screen
High delivers 5 5 ounces ( 0,162 l ) per
minute at 1 000 psi ( 68 bar ) back pressure
Low delivers 3 5 oz (0, 103 l ) per minute
at 1 000 psi ( 68 bar ) back pressure
Motor speed increases automatically from
“L” to “H” if back pressure exceeds
2 500 psi
(172 bar)
LCD display and LED
light
1 Button number 1 turns on/off the LED
2 Button number 1 turns on display
3 The tool’s trigger also turns on the LED
and display
4 The LCD and display will turn off after
30 seconds
Parts
Item Part
2 Coupler
16 Vent valve
17 Battery
19 Control button
20 Display
21 Hose
22 LED light
23 Bulk valve
24 Support
25 Hose holder
Fig. 1
Fig. 2
NOTE
Grease meter is accurate and does not
show output if prime is lost
Change unit of measure to ounces or
grams by holding button “1” for
15 seconds
13