SKF PowerLuber 1882E, Инструкция по эксплуатации и обслуживанию, Страница: 12 / 24

Models
Sales model Components included
1882E Grease gun with battery, charger 230 V AC European and carrying case
1870E Charger 230 V AC European
1871 Battery pack
1236 Hose, 36 in ( 914 mm )
5852 Coupler, midget hydraulic
251-10124-7 Coupler (European)
Description
Lincoln PowerLuber is a lithium-ion battery
operated grease gun Gun was developed for
manual lubrication of grease points and
includes light emitting diode (LED) and
electronic control center
PowerLuber is driven by a small, low
voltage electric motor connected to a gear
transmission Rotary motion of motor is
converted into reciprocating motion of
plunger using yoke mechanism PowerLuber
is a positive displacement single acting
pump
Technology incorporated into 1880 series
PowerLuber includes:
1 Motor protection preventing overload
due to excessive current draw Display
will flash red when this occurs
2 An LCD showing battery charge, pump
speed and grease output
3 An illuminating LED light to help locate
grease fittings in dim light
Specifications
Basic PowerLuber model 1880
Operating power 14 5 to 20 V DC
Maximum operating pressure 1)
Low output 6 000 psi (413 bar)
High output 6 000 psi (413 bar)
Grease reservoir capacity 14 5 oz (411 g)
Maximum peak pressure 10 000 psi (689 bar)
Operating temperature range 0 to 120 °F (–18 to 50 °C)
Operating current 4 A at 20 to 130 °F (–6 to 54 °C)
Rated current 5 A at 20 to 130 °F (–6 to 54 °C)
Lubricant (grease) Up to NLGI #2
Grease output
Low output (L)
3 5 oz/min (0,103 l/min.)
High output (H) 5 5 oz/min (0,162 l/min. )
Weight 6 5 lbs (2,0 kg)
Accessories
Battery li-ion
Model 1871
Output 20 V DC maximum
Capacity 2 500 mAh
Battery charger Model 1870
Charge time 1 5 hours
Input, vac (0 6 A) 120 v, 60 hz
Outlet hose Model 1236
Pressure rating 10 000 psi (689 bar)
Length of hose 36 in (914 mm)
Sound pressure LpA 69 5 dB(A), uncertainty (K) 3 dB(A), Acoustic power LwA 80 5 dB(A), uncerta-
inty (K), 3 db(A), Vibration emission value (ah) 0 6 m/s
2 , uncertainty (K) 1 5 m/s 2
1) Gun will operate continuously under stated maximum operating pressure until motor’s thermal protection activates If maximum
operating pressure is exceeded, pump will momentarily stall and run intermittently until maximum peak pressure is reached
2) Operating current and grease output data at 1 000 psi ( 69 bar )
3) The declared vibration total value has been measured in accordance with a standard test method and may be used for comparing
one tool with another and the declared vibration total value may also be used in a preliminary assessment of exposure
4) The vibration emission during actual use of the power tool can differ from the declared total value depending on the ways in which
the tool is used; and of the need to identify safety measures to protect the operator that are based on an estimation of exposure in
the actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off and
when it is running idle in addition to the trigger time)
5) Flow meter accuracy compromised below freezing
12