SKF Multilog On-Line System IMx-M, Руководство пользователя

Страница: 95 / 313

Protection
IMx-M Manager
SKF Multilog On-Line System IMx-M 2 - 75
User Manual

The USB port for CMM serial interface is located on the front panel of each
condition monitoring module. See
Condition Monitoring Module (CMM) chapter for
the physical location of the USB port. The actual physical connection between the
host PC and a condition monitoring module is described in the
Condition Monitoring
Module Serial (USB) Interface chapter.

The USB port for PRM serial interface is located on the front panel of each
protection module. See
Protection Module (PRM) chapter for the physical location
of the USB port. The actual physical connection between the host PC and a
protection module is described in the
Protection Module Serial (USB) Interface
chapter.

Use a SKF USB isolator cable. Connect the USB cable to a free USB port of the PC.
Connect the other end of the USB cable to either the condition monitoring module's
USB port or the protection module's USB port. The connected module is where the
slot configuration will be updated.
Important - SKF USB isolator cables shall always be used when connecting to
IMx-M USB ports.

USB driver installation instruction is found in @ptitude Observer
DVD.
Command is where commands or instructions are entered manually.
How to Select COM Port
To Find Windows Allocated COM Port Number:

Open Control Panel window and select System .

Select Device Manager.

Double click on Ports (COM &LPT) to see the available USB Serial Port as
shown, below.