Protection
IMx-M Manager
SKF Multilog On-Line System IMx-M
2 - 67
User Manual
Editing an Existing Project
Select Open Existing Project.
Figure 2 - 37.
Editing a Project (Master Project File).
As soon as this option is selected, a "File Open" dialog will be launched. Use this dialog
to browse the location of the existing project to open the desired master project file
(*.mhf).
Once the master project file has opened, the IMx-M Manager will launch into its main
view and validate any slot configuration files (.bin) that are present in the project (see
below).
Figure 2 - 38.
Viewing an Existing Project.
Note on the figure above, that the project is listed as READ ONLY. This status can only
be reset to ADMINISTRATION MODE after the project password has been entered.
