Protection
Protection Part Operation
SKF Multilog On-Line System IMx-M
2 - 51
User Manual
Figure 2 - 21.
Start Menu.
1.
Select a function with up and down arrows.
2.
Confirm the selection with
OK
.
Bar Graph Display
The IMx-M can show two bar graphs with values from analog channel 1 to 16 or
combined measurements 1 to 8.
The
channel alarm levels
are displayed in the background: green for normal, yellow for
alert and red for danger.
The
channel value
is displayed as a blue bar and also printed in text at the top together
with engineering unit and detection type.
1.
Select bar graph number (1 or 2) with up and down arrows.
2.
Confirm the selection with
OK
.
3.
Select a channel with up and down arrows, from analog channel 1 to 16 or
combined measurement 1 to 8.
4.
Confirm the selection with
OK
.
5.
To set the second bar graph, repeat steps 1 to 4.
To select graph number
To select a channel
Bar graph 1 display
Figure 2 - 22.
Bar Graph.
