Protection
Protection Module Configuration with IMx-M Manager
SKF Multilog On-Line System IMx-M
2 - 131
User Manual
Figure 2 - 97.
Selecting a 4-20 mA Output type.
Configuring a Relay Module
The configuration of relays is described below. For information on relays see section
To configure a specific relay module, from the configuration hierarchy, simply select a
relay module to configure. A list of status for each of the 32 relays will then be displayed
in the main work view.
Figure 2 - 98.
Configuring a Relay Module.
By default, all relay types are set to NOT IN USE
.
To actually enable and configure a relay for use, either double-click on, or select a
target relay number and press the
Edit
button. This will launch the
Relay
dialog as
shown in the figure below:
