Protection
Protection Part Operation
SKF Multilog On-Line System IMx-M
2 - 53
User Manual
Channel Values
The Channel Value menu shows channel values with engineering unit and/or detection
type for all channels (if applicable).
Analog Ch Values
: Displays engineering unit and detection type of all analog
channels 1 to 16 and combined measurements 1 to 8.
Analog Ch Bias
: Displays analog channel bias in mV (or uA if configured for 4-20
mA input) for all analog channels bias (same as Gap) 1 to 16.
Digital Ch Val
: Displays engineering unit of all digital channels 1 to 8.
Digital Ch Peak
: Displays engineering unit of all digital channels peak 1 to 8.
1.
Select values to be shown with up and down arrows.
Figure 2 - 25.
Channel Values Menu.
Analog ch value
Analog ch bias (Gap)
Digital ch value
Digital ch peak
Figure 2 - 26.
Display - Channel Values.
2.
Confirm the selection with
OK
.
3.
Use up and down arrows to see all channel values.