Protection
Protection Module Configuration with IMx-M Manager
2 - 158
SKF Multilog On-Line System IMx-M
User Manual
Figure 2 - 124.
Selecting the Master Channel and Crossover Voltage.
Once the master channel has been selected, set the
Crossover
point in "mV".
This is the point at which the measurement will switch from using sensor S1
on channel 1 to sensor S2 on channel 2. For this example, we will be using -16
000 mV.
With the sensor setup configured, all that remains is to assign the acquisition
parameters and the alarm values (see figured below).
