PowerFlex Battery Charging System
Small and lightweight, the SKC PowerFlex
®
is an advanced charging system
designed for optimal charging of NiCad and NiMH ba
tt
ery packs for most SKC
personal air sampling pumps. Ba
tt
eries for up to four di
ff
erent pump models
(excluding EX and ATEX models and models with lithium-ion [Li-Ion] ba
tt
eries)
can be charged simultaneously on the
fi
ve-station PowerFlex.
Pump-speci
fi
c cables are used to connect ba
tt
ery packs to the PowerFlex so that
only one charger is needed for most SKC personal sample pumps. PowerFlex fully
charges ba
tt
ery packs in 6 to 8.5 hours, and then automatically switches to a safe
pulse trickle charge. Each a
tt
ached ba
tt
ery pack runs through an independent
cycle. An LED at each port indicates ba
tt
ery charge status. Ba
tt
ery packs can be
charged a
tt
ached to or detached from the pump.
Performance Pro
fi
le*
Dimensions
:
4.4 x 5.5 x 1.4 in (11.1 x 14 x 3.5 cm)
Weight:
1.1 lbs (0.5 kg)
Charging time
‡
:
6 to 8.5 hrs
Status LED:
Steady Red
= Charging
Steady Green
= Trickle charge
Input voltage:
100-240 V
Intrinsic safety:
Not intended for use in explosive or hazardous
locations
Approvals:
Power supply is
for electrical safety and
is
CE
marked.
* For U.S.-produced pump models only. Not compatible with Ex or ATEX-approved models.
‡ Typical charging times vary with model, ba
tt
ery capacity, and level of discharge.
Operating Instructions
863 Valley View Road, Eighty Four, PA 15330 USA
