background image

Safety decals

!

  WARNING!

The machine is supplied with safety decals on delivery. They must 

not be removed or defaced. If a safety decal becomes damaged, you 

can order a new one free of charge from Skandia Elevator AB. Specify 

the part number of the decal. See the section below and the previous 

chapter Machine Overview.

There are safety decals for:

-   Mandatory (white symbol on round blue background).
-   Forbidden (black strike-through symbol on round white background with 

red surround).

-  Warning (black symbol on triangular yellow background with black 

surround).

!

  WARNING!

The mandatory instruction, forbiddance or warning given on all safety 

decals must be considered or serious injury or death may follow. 

Skandia Elevator machines have the following safety decals:

Part number/Safety decal

Refer to the "Machine Overview" chapter for 
placement.

Written definition

DEK3090

Read the "Back stop" section in the 

elevator's assembly instructions before 

test starting the motor for the first time.

DEK3100

Do not place the valve with the motor 

side face down.

DEK3140

Changing settings and equipment is 

prohibited.

DEK3030

Warning for conveyor chain!

SKA

ND

IA 

ELE

VA

TO

R –

 D

EK

30

90

SKANDIA ELEVATOR - DEK3030

SKA

ND

IA 

ELE

VA

TO

R –

 D

EK

31

00

SKA

ND

IA 

ELE

VA

TO

R –

 D

EK

31

40

9

 SKANDIA ELEVATOR – SEH 50/18, 50/23 & 63/30

Содержание H-LINE 50/18





























Отзывы: