©SJE Rhombus
PN1067582A
Rev 12/20
Manufactured by:
SJE Rhombus
Toll free: 1-888-DIAL SJE
Email: [email protected]
22650
County
Highway
6
(1-888-342-5753)
Website:
www.sjerhombus.com
PO
BOX
1708
Phone:
218-847-1317
Detroit
Lakes,
MN
56502
USA
Fax:
218-847-4617
TimeZone
™
Digital Timer Control Panel
Installation Instructions and
Operation Manual
This control panel must be installed and serviced by a licensed electrician in
accordance with the National Electric Code NFPA-70, state and local electrical codes.
UL Type 4X enclosures are for indoor or outdoor use.
Warranty void if panel is modified.
English 1
For information regarding operation,
available options, or servicing
questions, please call an
SJE Rhombus customer service
technician:
1-800-Rhombus (1-800-746-6287)
Monday-Friday, 7:00 AM to 6:00 PM Central Time
SJE Rhombus offers a five-year limited warranty.
For complete terms and conditions, please visit www.sjerhombus.com.
Products returned must be cleaned, sanitized, or decontaminated as necessary
prior to shipment to ensure that employees will not be exposed to health hazards
in handling said material. All applicable laws and regulations shall apply.
?
Specifications
Operation:
Four Timers available
(4 x ON/OFF cycles/day)
Input Voltage:
100 to 250Vac. 50/60Hz
Pump Ratings:
0.5HP ~ 3HP (6~20FLA)
• 1/2HP ~1.5HP at 110Vac, 50/60Hz
• 1/5HP ~ 3HP at 230Vac, 50/60Hz
Power Relay:
2 pole, 25A rated
Operation Temperature: -
10
℃
to 50
℃
Part Number / Circuit Breaker:
1067561S / 2 pole 16A for pumps rated for 0-12A
1067560S / 2 pole 25A for pumps rated for 9-20A
Clock:
Real Time clock with Super Capacitor power
backup (5 days)
Accuracy:
Turn ON/OFF time set accuracy (1 min)
Enclosure:
Thermoplastic, TYPE 4X/IP65
(20.3 x 15.2 x 10.2 cm)
English 4
Operatation Guide
A. When turning the knob clockwise slowly, increment by 1 min
B. When turning the knob clockwise faster than A., increment by 10 min
C. When turning the knob clockwise faster than B., increment by 1H
D. When turning the knob clockwise the fastest possible: increment by 4H
E. Same logic when turning the knob counterlockwise (decrease the value)
F. If there is no operation for 20 sec, the display will return to the main screen
G. The service function is used for alerting the user when it is time to change a filter
or to serivce the equipment after the accumulated run time is reached.
Main Screen
Rotate
Rotate
Rotate
Rotate
Escape
Escape
Escape
Escape
Escape
Escape
Escape
Escape
Escape/Rotate
Enter
Enter
Enter
Enter
Enter
Enter
Enter
Enter
Save and return
to Main Screen
Timer 2, Timer 3, Timer 4 same setup method as Timer 1
Rotate to change filter or service number
Rotate to change START TIME
Rotate to change STOP TIME
Rotate to change CLOCK (H+MIN), see notes A to E
See notes G
The icon will flash on main screen when filter or service timer done,
push and hold ESC button 4
seconds to reset the filter or service time.
Save and return
to Main Screen
Notes :
Save and return
to Main Screen
