4
6
Air Therapy Internal Mattress Components
1. Prepare the disinfectant according to the manufacturer’s recommendations.
2. Prepare a separate bucket of warm, fresh water to be used for rinsing the equipment after
cleaning/disinfecting procedures are completed as instructed.
3. Using a clean cloth dampened with the disinfectant solution, wipe all internal mattress
surfaces, including the air cells, and allow to remain wet for the manufacturer’s
recommended contact time.
4. Rinse all surfaces of the air cells with fresh water and clean cloth to remove chemical and
organic residue.
5. After cleaning, dry the internal air cells with a clean, dry cloth.
6. After all mattress components are dry, reinstall the top cover.
7. Store the mattress in a clean environment until the next use.
NOTE:
Only the outer cover of the mattress requires cleaning and maintenance. Disassembly
of the support surface for the maintenance of internal components is not recommended. DO
NOT use harsh solvents or cleaners. Special care should be used to not puncture the mattress
with needles or sharp instruments. This may result in loss of integrity of the mattress cover or
internal components.
Optional Accessories
Full-Frame Trapeze
The entire frame of the trapeze is to be wiped using a coarse cloth, dampened with the
disinfectant solution, prepared as directed by the manufacturer’s recommendations, to remove
organic material and visible dirt.
Allow the trapeze to remain wet with disinfectant solution for the manufacturer’s recommended
contact time.
Rinse the trapeze with a clean cloth dampened with fresh water to remove chemical and organic
residue.
Under-bed Lighting
Used to softly and discreetly illuminate the floor underneath to guide you when you step out of
bed or when approaching the bed.