SIYI MK15E Скачать руководство пользователя страница 31

Страница: 31 / 95

MK15E User Manual V1.1

1.7 Indicator Definition

The status indicators on MK15E transmitter and Air Unit use three different colors

and different blinking frequencies to indicate the system’s working or abnormal

status.

1.7.1 Transmitter Indicator

Solid Red: No communication between transmitter and Air Unit.

Fast Red Blinks: Transmitter is binding to Air Unit.

Slow Red Blinks: Firmware does not match.

Triple Red Blinks: Image transmission initialization failed.

Four Red Blinks: Transmitter requires calibration.

Red-Green-Red-Green-Red Blinks: Unexpected power off of MK15

Android system.

Slow Yellow Blinks: Transmitter power voltage abnormal.

Two Yellow Blinks: Transmitter Bluetooth is not identified.

Yellow-Red Blinks: Transmitter high-temperature alert, level one.

Yellow-Red-Red Blinks: Transmitter high-temperature alert, level two.

Yellow-Red Blinks: Transmitter high-temperature alert, level three.

Solid Green: Perfect communication, 100% data package received.

Green Blinks: Blinking speed indicates MK15 system’s signal strength. The faster it

blinks, the worse the signal is.

Содержание MK15E






















































































Результаты поиска

Содержание MK15E

Отзывы:

SIYI MK15E, Руководство пользователя, Страница: 31 / 95

Результаты поиска

Содержание MK15E

Отзывы: