SIYI DK32S, Руководство пользователя

Страница: 83 / 97

DK32S Transmitter User Manual (V1.0.3)
- 83 -
2019 SIYI Tech All Right Reserved
3. Then link the transmitter 2 to the sky station; the transmitter is always the master
transmitter even if you restart the sky station or transmitter.
7.2 Voltage Calibrating
Before using the sky station, it is necessary to calibrate the telemetry voltage of
both the sky station and the aircraft.
Here are some preparing work before calibration:
1. Power on the sky station and the transmitter;
2. Link the sky station to the transmitter.
Steps to Calibrate the Telemetry Voltage of the Sky Station (RX)
1. Power on the sky station through any of the PWM port, the voltage range is from
3.6V to 10V, measuring by a multi-meter;
2.
Let’s take an example of 6.0V; select “Standard Voltage” in the RX menu, tap
on “+/-” to set the standard voltage to 6.0V;
3.
Tap on “SET”, in the screen it pops up “Calibrating Succeed”, the calibration is
finished.