IndustrialPro™ and MobilityPro™ Gateway
User's Guide
Copyright © 2010 Sixnet LLC. All rights reserved.
23
1.11
– November 2, 2011
2.1
Connecting to the modem
Should you run into any issues connecting to the modem, refer to the
BlueVue Device Manager
Troubleshooting
appendix.
Click on
Tools > Settings > Connection tab
to select the interface your PC will use to connect to the modem.
Figure 4 – The different ways to connect to a modem
2.1.1
Using a serial cable:
1)
Select
Serial
2)
Select the
COM
port in the dropdown list, then click OK
2.1.2
Using an Ethernet or USB cable:
3)
Select
Modem IP
4)
Enter the appropriate modem IP
then click
OK
. By default, the DHCP-assigned IPs will
be
192.168.0.1
for
Ethernet
and
192.168.111.1
for
USB
. If using USB, the BlueTree
