Step One Parts Included:
a)
Seat mounting bracket (1)
b)
1 ¼” screws (4)
c)
Lock washers (4)
d)
Flat washers (4)
e)
Allen wrench (1)
f)
Saddle seat (1)
Step One Instructions:
1.
Flip the saddle seat (f) upside down.
2.
Lay seat mounting bracket (a) on bottom of
saddle seat (f) and align holes on seat
mounting bracket (a) with those on the
bottom of saddle seat (f) with adjustment
arm pointing toward the longer dimension.
3.
First, place locking washers (c) on the 1 ¼”
threaded screws (b) followed by flat
washers (d) as shown in diagram on left.
4.
Tighten with fingers until Allen wrench (e)
is needed. Finish tightening all 4 screws (b)
with Allen wrench (e) until snug.
Step Two Parts Included:
a)
Saddle Seat with attached seat mounting bracket
b)
Pneumatic cylinder
c)
Base platform
Step Two Instructions:
1.
Place the bottom (wide end) of pneumatic cylinder
(b) into the hole in top of base platform (c).
These
parts will be locked into place in step four.
2.
Remove the
BLACK
or RED protective shipping ring
from the top of the pneumatic cylinder (b).
3.
Place hole in bottom of mounting seat bracket (a)
over the top (narrow end) of pneumatic cylinder (b).
These parts will be locked into place in step four.
4.
Sit down on the assembled SitTight to permanently
pressure-seat (lock into position) the pneumatic
cylinder (b) into the saddle seat (a) and base
platform (c).
Assembly Instructions
Please go to SitTight.com/Support for video assembly instructions and to view our
How to SitTight
video
.
Remove the
BLACK
OR RED
protective
shipping ring
