3 |
P a g e
© 2013 SiTime Corporation. All rights reserved.
Time Machine User’s Manual
Introduction
This User’s Manual describes the software and hardware features of the Time Machine II
(TMII),a portable kit designed for programming SiTime field programmable (FP) oscillators. The
Time Machine supports many SiTime oscillator parts, with special socket cards that can
accommodate different package sizes.
Important Notes
•
Refer to disclaimer section for terms and conditions governing the use TMII and devices
programmed on TMII.
•
After programming, place samples into an antistatic bag clearly marked "Engineering
Samples."
•
Samples can only be programmed using specific field programmable (FP) parts for a
given oscillator family. Refer to
http://www.sitime.com/fp-devices
for more information
on how to select and order FP parts.
•
Please contact your SiTime sales representative for large volume production orders.
•
The Time Machine II has not been tested for EMC compliance, EMI radiation
susceptibility, or any temperature and humidity cycling. The recommended temperature
range is 20°C to35°C.
Package Contents
Your Time Machine II package consists of the following items:
1.
SiTime Programmer (1 pcs)
2.
Socket cards:
Time Machine II comes with three different socket cards. Each adapter board includes
two or more sockets for connecting devices in different packages to the main unit for
programming. It is possible to remove and insert devices in the socket while the board is
connected to the SiTime Programmer
3.
USB Cable (1 pcs)
4.
Quick Start Guide (can also be found here -
http://www.sitime.com/tm-um
)
5.
Samples kit with several devices (enclosed device types may vary;please contact sales for
additional units)
6.
Tweezers for handling small devices manually
