P a g e
14 |
© 2013 SiTime Corporation. All rights reserved.
Time Machine User’s Manual
Data Log Mode
Data log mode allows storing additional information about programmed parts and order
during batch programming. To switch to the data log mode please select
View > Data Log
as
shown in the figure below.
Data Log Utility
has fields for entering ordering information, operator lot information and
part number. Fields marked with red asterisk should be filled mandatory. Once required
information is entered, it’s possible to start programming session.
At the beginning of programming session
Part Number Generator
appears showing decoded
Device status
Sessionstart button
Operator’sname
Quantityof parts to be
programmed
Lot ID
Operation selection
Channel selection
Sample request number
Part number field
Customer FP part number
Message window
Operation indicator
Mean part programming
time
Session start time
Session end time
Session yield
Quantity of processed parts
(prog failed)
