Sita IT Series, Руководство по установке, использованию и обслуживанию

Страница: 3 / 42

2
1. Introduction
This manual is for the following models of UV IT Series.
UV 80 IT
This Pressure UV Systems is manufactured by S.I.T.A. s.r.l.
These operating instructions contain important information for the operation and maintenance of the
equipment.
Please ensure that these operating instructions are carefully read by all relevant persons before putting
into operation, to ensure the safe use of the UV system. The operating instructions are an integral part
of the equipment supply.
Before putting into operation, all the conditions necessary for safe operation of the equipment must be
fulfilled.
The installation, commissioning and maintenance of the equipment should only be carried out by
qualified personnel.
The equipment should only be operated by authorized personnel who have been trained accordingly.
No modifications should be made to the equipment without consulting S.I.T.A., as this could effect the
safe operation of the unit. S.I.T.A. shall not be held responsible for damage resulting from unapproved
modifications.
I
NSTRUCTION
:
The operating instructions are to be kept where they will be accessible for operating and
maintenance personnel.