SOCKET HEAD WRENCH
( not included )
Do not use
any hand drill
on this product
PHILLIPS SCREWDRIVER
( not included )
WRENCH
( not included )
1- After laying out all components, place one Leg (H) upright as shown below. Insert a Bolt ( A ) through the
Aluminum Frame and through the slots in the topside of the Legs. Secure in place with a Washer ( B ), a Split Lock
Washer ( B1 ), and a Hex Nut ( C ). With all 4 Bolts secured, attach the second Leg using the same procedure.
Figure 1
Hardware and Parts
(12)
2.75
B
(4)
C
(12)
(12)
A
(12)
B1
(4)
E
ALLEN WRENCH
( included )
D
G
( Top )
H
( Leg)
I
( Support )
J
( Stretcher )
C
B1
B
A
(4)
F
2.75
2.50
Item No: MHUD-DT60B
Hudson Cocktail Table
Assembly Instructions
