40
12. CONSULTATION
To go into this section press the “View” key. We
will find detailed information about what the controller
is doing.
There is a “
General consultation
” and a “
Pro-
gram consultation
”, and to move between them,
press the left and right arrows. To move through the
screens in each group, press the up and down keys.
Look at the resume:
The last visited consultation screen is always re-
corded. This is why when coming from “Functions” to
“View” it will show again the last screen seen when
exiting the “View”.
When a “View” automatically enters after a power
cut, it is done through the first screen of the general
consultation.
As it is located in “Functions”, by not pressing a
key for 10 minutes, it will automatically return to “Vie-
w”, which makes PC user management easier.
12.1. GENERAL CONSULTATION
The general consultation is formed by a series of
screens with resumed information of the system gen-
eral operation.
The
first screen
shows the clock information
from the seconds to the year.
The second line usually informs about the new
anomalies which have taken place since the previous
reading, in the same line it also informs if there are
some program out of service. When a malfunction or a
manual action of the next list which is shown at follow-
ing takes place, it will be shown intermittently in the
second line until the user repairs the anomaly or/and
knows it by canceling it at “Function - Manual - Mal-
functions” [10].:
o
General malfunction
o
Flow malfunction
o
Irrigation meter malfunction
o
No control fertilizer malfunction
o
pH regulation malfunction
o
Conductivity control malfunction
o
Out of service
o
In stop
Monday
22/09/14
18:49.33
New anomalies : 03 Prog. OUT SERVICE
Monday
22/09/14
18:49.33
Flow malfunction
The
second screen
inform about the programs
and sectors operating at that moment, all these in the
first line. If more than four programs are activated at a
time, it will be intermittently shown in groups of four.
