8
9
CHAPTER 6 CHARGING THE HOVERBOARD
This chapter mainly discusses the charging methods, how to maintain the battery, the safety issues you need to pay
attention
to, and battery specifications. For safety of yourself and others, and extend the battery’s life and improve
battery performance, please make sure to follow the following operations.
6.1.Low battery
When you find the battery indicator is red and flashing, it indicates low battery. It is recommended that you stop driving.
When the power is low, there is not enough energy for your normal driving, then the system will automatically tilt the
base of the platform to prohibit the operator's use. It is very easy to fall if you insist on driving at this time, and negatively
affect battery’s life.
Do not use the battery in the following cases.
Giving out some odor or excessive heat
Leakage of any substance.
It is prohibited to disassemble the battery.
Do not touch any substance leaking out of the battery.
Do not let children and animals touch the battery.
Batteries contain dangerous substances inside. It is forbidden to open the battery and to stick objects into the battery.
Use only the supplied charger.
Don't over charge lithium batteries. The battery pack consists of lithium batteries.
-
-
-
-
-
-
-
-
NOTE:
When you find the battery indicator is green and flashing then after some time it will change to red light an
d the alarm
will beep. Now it does not allow you to drive anymore. It indicates low battery. It is recommended that you stop driving
and recharge the hoverboard. When the battery is low, there is not enough power for normal driving. The operational
system of the hoverboard will automatically tilt the platform forward to prohibit use. This could cause the driver to fall
off the hoverboard and become injured.
CAUTION
When the charging. Do not ride the hoverboard!
When charging ongoing then the LED light of the battery charger is red color.
When charging is finished then LED light of the battery charger turns into green color.
When charging finished unplug the battery charger from the mains power supply and from the hoverboard.
Make sure that the hoverboard, the charger and the DC power socket on the hoverboard are kept dry.
Using another charger may damage the product or create other potential risks.
Plug the power adapter into the DC power port on the back of the hoverboard and a standard power outlet.
Make sure the green indicator on the adaptor lights up.
When the red indicator lights on the charger indicate charging property, otherwise check if the line is connected
property.
When the indicator light on the charger changes from red to green, this indicates that the battery is fully charged.
In this case, please stop charging. Over charging will affect the battery life.
Overcharging will reduce the lifetime of the battery. Please refer to the charging time in the specification sheet.The
product should not be charged over longer periods.
Never charge the product without supervision.
The product should only be charged in temperatures between 0℃ - +45℃.
If charging at lower or higher temperatures, there is a risk that the performance of the battery will be reduced and a
potential risk of damage to the product and personal injury.
Charge and store the product in an open, dry area and away from flammable materials (i.e. materials that may burst
into flames).
Do not charge in sunlight or near open fire.
Do not charge the product immediately after use. Let the product cool down for one hour before charging.
If the product is left with other persons for example during a holiday period, it should be partially charged (20 - 50%
charged). Not fully charged.
Do not remove the product from the packaging, charge it fully and then put it back into the packaging. When shipped
from the factory, the product has often been partially charged. Keep the product in a partially charged state, until it
is going to be used.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
6.2.Charging steps
