2
3
1.2.The preparation before operation
Before using, the battery should be fully charged. Please check Chapter 6.
1.3.The weight limitation of the operator
he reason of the weight limitation: 1. guarantee the safety of the operator; 2. decrease the damage of overloading.
CHAPTER 2 OPERATING THE BALANCE SCOOTER
2.1.Calibration
If your hoverboard seems to pull to the left or right, you may need to recalibrate its sensors. Step as below:
Step 1: Shut down/level the scooter.
Step 2: Press the Power button for more than 10 seconds until you see the light flashing 5 times.
Step 3: Shutdown scooter again.
NOTE:
Built in Self-Balance function, it is easy for driving.
2.2.Operating principal
The hoverboard uses Dynamic equilibrium, using internal gyroscope and acceleration sensors. The status of the
hoverboard is controlled by the center-of gravity. It is adjusted by motor, which is controlled by the servo control
system. When you lean forward, it will sense your actions to accelerate. When you need to turn, slow it down and move
your foot forwards or backwards then the center-of gravity of the body moves left or right therefore the hoverboard
can sense moving left or right.
The hoverboard has inertial dynamic stabilization system, so it can keep anterior-posterior balance but cannot
guarantee the left and right. So when turning, the scooter needs to be operated slowing, otherwise, you may be
injured.
-
-
2.3.Learn how to use it
Step 1: Press the power button to turn on the hoverboard.
Step 2: Put the hoverboard on a flat ground and make sure all safety measures are taken. Put one foot on the pad that
will trigger the pedal switch to turn on the operation indicator, after the system enters the selfbalancing mode,
put the other foot on the pad.
Step 3: Take control of the hoverboards’ forwards or backwards, do remember the movement of your body should not be
abrupt.
NOTE:
If you are not in a balanced condition when you trigger the foot-switch, the buzzer will alarm, and the warning LED
will light. The system is not in a self-balanced condition. Without a balanced condition, you should not operate the
hoverboard. Then you need to calibrate the sensors, see point 2.2.
Step 4: Control the left and right direction of the hoverboard.
Step 5: Before you get off, make sure that the hoverboard is still in balanced condition and stopped, then step off one
foot, then the other foot.
WARNING!
You should never turn violently when driving fast.
You should never ride sideways or turn on a slope. It will lead to a fall and injury.
