1 / 2
Thank you for choosing
ENDA
ATDW02
R
ail
M
ount
ed
Dishwasher Time Relay
.
Te
chnical Specifications
Max. 2000m
0 ... +50°C/-25 ... +70°C (Mustn't be icing and condensation in the environment).
IP20, According to EN 60529
ENVIRONMENTAL CONDITIONS
Relative humidity 80% for temperatures up to -31°C decreasing linearly to 50% relative
humidity at +40°C. (Mustn't be condensation in the environment).
Height
Ambient/storage temperature
Max. relative humidity
Rated pollution degree
90-250V AC +10% -20%.
Max. 10VA
Screw-terminal connection.
Depending on the effect of voltage
: max 0.2%.
Rinsing duration
EMC
EN 61326-1:
2013
EN 61010-1: 2010 (pollution degree 2, overvoltage category II)
3kV AC min. 60 Seconds, 4,2kV DC min. 60 Seconds.
Can be adjusted linearly between 1 and 30 sec.
Max. 0.04 seconds.
I
nsulation test voltage
Depending on the set value settings
:
max 4.5
%.
Depending on the effect of temperature :
max 1
%.
Supply voltage
Power consumption
Connection
Resetting time
Accuracy
Safety requirements
ELECTRICAL CHARACTERISTICS
OUTPUTS
Washing / Rinsing Outputs
Relay: 250V AC,
10
A (for resistive load)
.
Without load 10.000.000 operation; 250V AC, 10A resistive load 50.000 operation.
Washing LED illuminates when rinse output is active.
Rinse LED illuminates when rinse output is active.
LED Indicators
Life expectancy for relays
HOUSING
Mounting
Rail mounted (EN 60715, TH35)
Dimensions
W18xH90xD66mm
Weight
Approx. 90g (after packaging)
Enclosure material
Self extinguishing plastics.
Please read this document carefully before using this product. The guarantee will be invalidated if the
device is damaged by not following instructions detailed in the manual. The company shall not be
responsible for any damage or losses however caused, which may be experienced as a result of the
installation or use of this product.
ENDA ATDW02 Rail Mounted Dishwasher Time Relay
5 Different washing time selection with commutator.
Adjustable rinsing time between 1to 30 sec.
Washer motor for wash function (W) output relay.
Rinse function (R) output relay for rinsing function.
Rail mounted.
Screw-terminal connections.
CE marked according to European Norms.
Supply Voltage
Output Relay
ORDER CODE
ATDW02 - 2R - UV
UV 2
3
0V AC
2R 2
Relay
Product Basic Code
Rail Mounted Dishwasher
Time Relay
KEEP AWAY device from exposed to corrosive, volatile and flammable gases or
liquids and DO NOT USE the device in similar hazardous locations.
Avoid any liquid contact when the device is switched on.
DO NOT clean the device with solvent (thinner, gasoline, acid etc.) and / or abrasive cleaning agents.
Power
Washing Relay
ATDW02 - 2R - UV
OUTPUT CONTROL
3 Seconds
Latency Time
Rinsing Relay
Washing LED
Rinsing LED
Ty
Ty
Tb
Td
Td
Ty:
Washing duration
Tb:
Latency time duration
Td:
Rinsing duration
Ty Washing Duration
T1
: 30 Sec.
T2 : 60 Sec.
T3 : 90 Sec.
T4 : 120 Sec.
T5 : 180 Sec.
Tb
3 sn
Latency Time Duration
Td Rinsing Duration
1-30 Sec. Can be adjusted on the device.
OPERATING
When the device is power-up, one of the terminals T1, T2, T3, T4 and T5 is short-circuited with T0 terminal input and the device
starts. The wasing relay output will be activated until the wash time of Ty is turned on and the washing led will turn on and the
washing motor will run.
When the washing cycle expires, the washing relay output stops, the wash lamp goes off, and the device enters standby mode
(Tb) for 3 seconds. After 3 seconds, the rinsing relay output is activated during the Td (1-30 sec. Time according to the set rinse
time), the rinse led is illuminates and the rinsing motor runs. When the Td rinse time expires, the rinsing relay output stops, the
rinsing lamp goes off, and no operation is performed until the device is repower-up.
SİSEL MÜHENDİSLİK ELEKTRONİK SAN. VE TİC. A.Ş.
Şerifali Mah.
Y.Dudullu 34775
ÜMRANİYE/İSTANBUL-TURKEY
Tel : +90 216 499 46 64 Pbx. Fax : +90 216 365 74 01
url : www.enda.com.tr
Barbaros Cad. No:18
