M-Tilt Assembly Instruction
1
2
5
4
6
3. Mount the handle-wire using three
wire clips (4) with 4x16mm wood screws,
- make sure not to bend or crimp the wire !
Wall mount pos.
5x20mm
R011502
4x16mm
R011500
Wire clip
R010230
m6x16mm
R011057
Hex Wrench
R011921
Assembly Steps :
Attach Tilt system (2) to the
1.
top-plate (1) using eight
m6x25 screws (5), alternative
use eight 5x20mm wood screws
if the top-plate is without inserts.
2. Mount the handle (3) using two 4x16mm
wood screws.
Page 1 of 2