5 / 10
3. Controller function
1. JOG & SHUTTLE WHEELS
Search:
Touch the dial and rotate it to navigate through the track. Press the jog mode button
and the light is illuminated first.
Pitch:
While playing, rotate the dial to adjust the pitch bend.
Cue point:
In pause state, rotate the dial to navigate through the track and once you enter a
desired point press the Play/Pause button. Then the CUE button light blinks three times to
show that the point was recorded successfully.
Note: Rotate the dial clockwise is forward, counterclockwise is backward
2. PLAY/PAUSE BUTTON
Each time you press the PLAY/PAUSE button, the operation changes from play to pause or
from pause to play.
3. CUE BUTTON
To define and record a return point from which playback starts again.
4. PITCH BEND + BUTTON
The pitch speeds up when the + button is pressed and returns to the original pitch when it is
released.
5. PITCH BEND
– BUTTON
The pitch will slow down while the
– button is pressed and returns to the original pitch when it
is released.
6. REPLACEABLE CROSSFADER
Enables clean segues between the two input channels. Hard left selects channel 1. Hard right
selects channel 2. When the crossfader is centered, both assigned channels are live. Use the
crossfader for fast and seamless segues from one selected channel to the other.
7. SCRATCH MODE
When the (10) is illuminated the wheel is in SCRATCH mode, you may press the SCRATCH
button to exit SCRATCH mode.
8. When you enter the JOG work mode the lamp lights up.
