59 62 134 D 3407
12
D 3407
.
208.01.10
.
02 07.2009
2 General notes for operation
Sirona Dental Systems GmbH
Checking the system time before starting
Operator’s Manual SIDEXIS XG
2
General notes for operation
2.1
Checking the system time before starting
Why is it necessary to check the system
time?
SIDEXIS saves the creation time for each image. For this reason, the date
and time setting of the system clock integrated in the PC must occasionally
be checked and, if necessary, corrected.
Where do I find the system time?
On the Windows desktop, the system time is displayed in the systray, which
is usually located at the bottom right corner of the screen. The date is
displayed when pointing with the mouse cursor to the time.
How can I change the system time?
The current time setting can be changed in a dialog box which opens when
you double-click the time display. The date is set on the left half of the “Date
& Time” tab.
● The month and year settings are selected using drop-down lists, which
unfold when you click the arrows next to them.
● The day of the month can be selected by clicking the corresponding day
on the calendar sheet.
● The time setting is changed by clicking the value to be set (hours, minutes
or seconds) and then using the corresponding spin buttons.
Alternatively, the desired value can also be entered directly using the
keyboard.
● The dialog box is then closed by clicking
"OK"
.
CAUTION
If the system clock is improperly set, the time of creation saved for new
images will also be incorrect. This would then result in incorrect
documentation and make it difficult to retrieve these images.